Indoor Guinea Pig Cages

The RSPCA recommend 120 x 60cm as the minimum cage size for 2 guinea pigs, and to add 30cm for each additional pig.   We offer 3 standard sizes for Guinea Pigs (120 x 60cm, 150 x 60cm or 180 x 60cm).

Large Indoor Guinea Pig Cage C&C Style with Open Top 120x60cm

£209.00

Large, high quality 120 x 60cm C&C style wooden indoor guinea pig cage with open top, and lift-off replaceable base unit.  Available with a mesh or perspex front, and suitable for a pair of guinea pigs.

This beautifully made indoor guinea pig cage meets the minimum space requirements recommended by the RSPCA, and is larger than most plastic cages you will find on the market.  Made by hand in the UK.

Large Indoor Guinea Pig Cage with Hinged Roof 120x60cm

£249.00

Large, high quality 120 x 60cm wooden indoor guinea pig cage with hinged mesh roof, replaceable lift-off base unit and your choice of mesh or perspex front, suitable for a pair of guinea pigs.  Also suitable for hamsters, mice, gerbils, and small pets.

This hutch is made from solid wood, and provides the minimum space recommended by the RSPCA for 2 guinea pigs.  Made by hand in the UK.

Extra Large Indoor Guinea Pig Cage with Perspex Front and Optional Roof – 150x60cm or 180x60cm

From £254.00  £259.00

Extra large, high quality C&C style wooden indoor guinea pig cage with perspex front, optional fold-over mesh roof, and lift-off replaceable base unit. This extra large indoor guinea pig hutch provides a spacious home for 2 or more guinea pigs to live comfortably, with plenty of room to run, play, hide and have fun!

Made by hand in the UK, and available in 2 extra large sizes:

  • 150 x 60cm – suitable for 2-3 guinea pigs.
  • 180 x 60cm – suitable for 3-4 guinea pigs.

The RSPCA recommend a minimum of 120cm x 60cm for two pigs, with an extra 30cm length for each additional pig.

Extra Large Indoor Guinea Pig Cage with Mesh Front and Optional Roof – 150x60cm or 180x60cm

From £259.00

Extra large, high quality C&C style wooden indoor guinea pig cage with mesh front, optional fold-over mesh roof, and lift-off replaceable base unit.  This extra large indoor guinea pig hutch provides a spacious home for 2 or more guinea pigs to live comfortably, with plenty of room to run, play, hide and have fun!

Made by hand in the UK, and available in 2 extra large sizes:

  • 150 x 60cm – suitable for 2-3 guinea pigs.
  • 180 x 60cm – suitable for 3-4 guinea pigs.

The RSPCA recommend a minimum of 120cm x 60cm for two pigs, with an extra 30cm length for each additional pig.

Super Large Indoor Two Tier Guinea Pig Cage with Optional Access Ladder and Roof 120x60cm

From £399.00

Large high quality 120x60cm wooden stackable indoor guinea pig cage over two tiers, available as two separate stackable hutches, or as a two tier enclosure with access ladder. Made by hand in the UK.

The RSPCA recommend 120cm x 60cm as the minimum cage size for 2 guinea pigs, and to add 30cm length for each additional guinea pig.  This two tier option is a good way of gaining some extra space for your pets if you have limited room in your house, or to separate pigs that may not be getting along.

Pet Home Customisation: Removable Drop-down Front Door

£29.00

This customisation turns the front panel of your chosen Pet home into a removable drop-down door, and includes special hinges and door catches enabling the door to open, lock and detach.  Removing the door will allow your pigs to hop in and out of their enclosure, and will provide easier access for cleaning purposes.

The cost covers 2 specialist hinges, 2 door catches, and dowelling/gluing the front panel into a robust door frame that will withstand daily use.

NOTES:

  1. This option is applicable at the time of purchasing a 120cm, 150cm or 180cm Guinea Pig hutch only (mesh or perspex front).
  2. For a neater finish, perspex is now rebated into the frame instead of screwing it on, and mesh doors have a wood trim attached on the inside to cover the sharp edges.

Pet Home Customisation: Side Access Door

£20.00

This customisation is for the creation of a small door within the wooden side panel of your chosen Pet Home allowing your pets access in and out of their home.  Please select whether you wish to add the door to the left and/or right sides.

Note: On a two tier pet home, the door will be built into the lower tier.

Pack of 4 Bolt-on Stand Legs – for purchase with a Pet Home

£59.00

These Stand Legs are designed to bolt-on to the base/side panels of our Pet Homes raising it off the ground by 45cm.  They are the simplest, most economic way of providing a stand solution for your Pet Home.

Suitable for all Pet Home models and sizes within our Pet Home range.

IMPORTANT NOTES:

  • The Legs are intended for purchase at the same time as a Pet Home or Replacement Base. Customers who purchase this product at a later date will need to drill 8 matching holes into the side panels of their Pet Home/Base unit using a 9cm drill.  We do not recommend customers trying this themselves.
  • If you already own one of our Pet Homes, our Pet Home Stand is an independent unit that can be purchased separately.

Pet Home Customisation: Castor Wheels

£25.00

This customisation adds 4 castor wheels to the base of your Pet Home or onto the Stand Legs, making the unit easier to move around your home.  

The castor wheels consist of 2 braked wheels (for the front) and 2 unbraked (for the rear).

When purchasing at the same time as your pet home, screw holes will be pre-marked for customers to screw the wheels on themselves.

Pet Home Customisation: Perspex Side Panel

£14.00

This customisation is only applicable at the same time as purchasing a Pet Home, and covers the upgrade cost of swapping wooden side panel(s) for perspex side panels.  Perspex sides will provide increased visibility of your pets, and will also allow them a view out.  Please select whether you wish to add the perspex panel to the left or right side (as you look at the cage).

Add this option to the Cart when you purchase your Pet Home.

If you already have one of our Pet Homes, please contact us for a price.

Pet Home Customisation: Perspex Front on upper tier

£6.00

This customisation is to upgrade the upper tier of your two tier pet home with a perspex front.

Lift-off Stand to fit our Pet Homes – 4 sizes

From £79.00

NEW DESIGN! This Stand comes in 4 standard sizes to fit our range of Pet Homes, and is designed as a separate unit so the Pet Home can be lifted on and off.

The space underneath provides a handy storage area which can house storage boxes up to 35cm in height.

Made by hand in the UK.

PLEASE NOTE THIS STAND IS NOT SUITABLE FOR A TWO TIER PET HOME – PLEASE CONSIDER THE BOLT-ON LEGS PRODUCT INSTEAD.